- Collections
Invoil C (formerly Apiezon C oil, M003) EMS
Apiezon OILS
Consist of esters or specially selected hydrocarbon fractions. They were developed for vapour-diffusion pump fluids:
- High purity, very low pressure, very stable.
- Pressures lower than 10-7 torr obtainable
- No need for cold trap.
- Good pumping speed.
- No corrosive deposits or vapours.
Physical Properties of Apiezon Oil Type C (now Invoil C)
Diffusion Pump Oil | Type C |
Vapour Pressure,torr @20?C | 10-7 |
Boiling Point,?C @ 1 torr | 225 |
Flash Point (open cup)?F | 510 |
Pour Point(ASTM)?F | 5 |
Density, g/mL @ 20?C | 0.875 |
@ 40?C | 0.863 |
Viscosity, kinematic,cS @ 20?C | 283 |
@ 50?C | 90 |
@ 100?C | 10.6 |
Coefficient of Expansion per | |
?C over 20-30?C (ASTM) | 0.00069 |
Thermal Conductivity Btu/in | 0.96 |
INVOIL C (formerly APIEZON OIL C)
Obtains the highest vacuum pressure (10-7 torr) of the Apiezon oils without the need of a cold trap. Suitable for most diffusion pump applications, including in electron microscopes and in vacuum coaters. This is an economic and effective substitute for Santovac 5 fluid. It should be noted that the ultimate vacuum is dependent on a suitably high backing vacuum and the out-gasing of TEM film and column components. Consequently the ultimate vacuum attained with Invoil C (Apiezon C) is very close to the theoretically much superior Santovac 5.
This product is not hazardous and does not require an MSDS.
A safety data sheet is available at apiezon.com
Code | Title | Pack Size | Availability | Price | Updated: 04-05-2024 | |
---|---|---|---|---|---|---|
M1-C-00100-X | Invoil C (formerly Apiezon C oil, M003) EMS | 100ml | 1 in stock |
$92.00 AUD
|
||
M1-C-00500-X | Invoil C (formerly Apiezon C oil, M003) EMS | 500ml | See above | $497.00 AUD | ||