Sticky Tabs, SEM adhesive
Very convenient self-adhesive tabs., pack of 216. May be applied to the surface of SEM specime...
Repositionable adhesive sheets
Repositionable Adhesive, Dry MountsThis is a pressure-sensitive mounting material. RD...
Araldite 6005 kit (DG)
Araldite 6005 Kit is also known as American Araldite. The blocks are slightly harder than thos...
Araldite 502 kit
Kit contains: $259.00 AUD
Araldite 507
For embedding samples for microscopyAraldite 507; CAS #26447-14-3, Specific Gravity: 1....
Araldite 6005
For embedding samples for microscopyAraldite 6005; CAS #3101-60-8, Specific Gravity: 1....
Araldite 506
For embedding samples in microscopyAraldite 506; CAS #25068-38-6, Specific Gravity: 1.1...
Araldite 502 (DG)
Araldite 502 is an epoxy resin embedding medium which yields a light gold colour block. Tissue...
Colloidal graphite extender
Extender for isopropal base collodal graphite adhesives.Water Base: Fl...
Rubber cement
Excellent for mounting drawings and photos on paper and for many types of paper pasting. Speci...
Fro-marker
A wide tipped pen designed for use with frozen sections. The pen provides a sticky membrane wh...
EMS cyanoacrylate debonder kit
An ultra fast, room temperature curing adhesive; a cyanoacrylate monomer. It bonds with virtua...
Quick Bond
An ultra fast, roo...
Kwik-Gard start up kit
The Kwik-Gard is a carefully packaged Sylgard 184 silicone that provides a faster and easier w...
Loctite Prism 4011
Designed for the assembly of difficult-to-bond materials, such as wood, paper, leather and fab...
Permabond 910 adhesive (DG)
Contains cyanoacrylate ester. Immediate bonding of biological specimens. It is not water solub...
Loctite 349 Improv adhesive
For bond glass/metal, appearance: clear/straw, cure type: UV, viscosity: 9,500cP, shore hardne...
Loctite Prism 4861 adhesive
For use with flexible surfaces, clear, gap fill 0.008", surface flexible Alkyl, viscosity 4,00...
Loctite Prism 454
For use with porous surfaces, clear, gap fills 0.010", surface insensitive Ethyl, gel type, te...
Loctite 409
General-purpose gel adhesive, clear, gap fills 0.010"; surface insensitive Ethyl, tensile shea...
Tissue grip water bath adhesive
Liquid water bath adhesive is used in Histology & Embedding staining, special st...
Slide coating adhesive (DG)
Prepared from 3-aminopropyltriethoxysilane in acetone. Good for coating glass slides to adhere...
Paraplast regular
Handy pellet form melts rapidly. Melting Point 56°CCuts to 4 micron thickness with excelle...
Loctite 404
This adhesive is perfect for those applications where a quick-curing adhesive is needed. Comes...
CCC Thinner
Thinner is available for the cement EMS12664 if it is too thick. $39.00 AUD
Stripper for Crystalbond 509
Crystalbond 509 stripper is used to remove Crystalbond 509It has a very low rate of eva...
Durcupan ACM epoxy (DG)
An aromatic polyepoxide is a colorless resin of relatively low viscosity with virtually no shr...
Coat-Quick 'G', Grid coating pen
The Coat-Quick "G" pen improves the adherence of tissue sections onto the grids. With a touch ...
Cytoseal mounting medium (DG)
Cytoseal is a type of mounting medium used in histology and pathology laboratories to preserve...
Wafer-Mount 562 adhesive film sheets
A dry temporary adhesive film, 0.003" thick, which can be easily cut to size with either a raz...
Wafer-Mount 559 adhesive film sheets
The wafer mount 559 is a new high strength plastic film can then be held down using a vacuum m...
Crystalbond, temporary adhesive
A temporary adhesive. These wash-away adhesives are used as a temporary bond for holding delic...
Conductive Lift-N-Press adhesive tabs
This 12mm diameter conductive tabs are similar to our adhesive tabs, but they work like carbon...
Loctite 460 adhesive (DG)
Our Loctite? 460 is a quick curing low viscosity glue that be used for mounting samples to any...
Krazy glue pen
The one we all know and have used. Ready to use. Requires no mixing or preparation. This pen c...
Mikrostiktm adhesive, non-conductive (DG)
Fast drying, ultrathin clear adhesive suitable for mounting small particles which can be subme...
Stripper for Crystalbond 590
Crystalbond 590-S stripper is an environmentally safe, water-dispersible, powder concentrate p...
Tempfix, SEM adhesive
A thermoplastic adhesive for mounting powder specimens and small particles especially for SEM....
Para-Tissuer, adhesive for wax sections
This pen provides a sticky membrane which not only stops paraffin sections from moving, wrinkl...
Epo-Tek H22 adhesive
Epo-Tek H22 is a two component, silver-filled epoxy system. Mixing ratio of silver resin paste...
Epo-Tek H20S adhesive
Epo-Tek H20S is a modified version of EpoTekH20E. Epo-Tek H20S is a highly reliable, two compo...
Conductive carbon paint #502
Conductive adhesive 502 is a combination of specially processed carbon particles in a fluoroel...
Electrically and thermally conductive adhesives
Electrally/Thermally Conductive (ETC) epoxy adhesives provide solutions to a variety of electr...
Silver conductive adhesive 478SS thinner
Our adhesive 478SS is a conductive, silver-based polymer which is used for thick film coatings...
Silver conductive adhesive 478SS
Our adhesive 478SS is a conductive, silver-based polymer which is used for thick film coatings...
Silver conductive 18DB70X coating (DG)
Silver Conductive Coating 18DB70X is a direct substitute for Silver Conductive Fluid 416, whic...
Conductive silver epoxy kit
This electrically conductive silver epoxy is used for adhering samples as well as solderless c...
Colloidal conductive silver extender
Extender for liquid and paste colloidal silver adhesive (EMS12630) used in scanning electron m...